| Antenna top2 RC-GPS- Worldwide time synchronisation and positioning via receiving GPS satellite signal
- The antenna is connected by a 2 wire cable (max. 100 m) to Theben top2 RC devices (up to 5 devices can be connected depending on device type)
- A top2 GPS power unit (item number 907 0 892) is also required when connecting to TR 611 top2 RC, LUNA 121 top2 RC, LUNA 122 top2 RC or SELEKTA 171 top2 RC devices
|
| Antenna DCF77 KNX- Radio control via antenna with KNX time switches: To ensure good reception, do not install the antenna in cellars or on distribution boxes. Connection is made via separate 2-wire, unscreened high-voltage power cable (max. 100 m), up to 10 Theben top2 RC devices can be connected. Polarity, short-circuit and interruption of the antenna circuit are each visually displayed to help with installation.
|
| Antenna top2 RC-DCF- Radio control via antenna with top2 RC devices: To ensure good reception, do not install the antenna in cellars or on distribution boxes. Connection is made via separate 2-wire, unscreened high-voltage power cable (max. 100 m), up to 10 Theben top2 RC devices can be connected. Polarity, short-circuit and interruption of the antenna circuit are each visually displayed to help with installation.
|
| Power unit top2 GPS- Required when connecting the antenna top2 RC-GPS to an individual TR 611 top2 RC, LUNA 121 top2 RC, LUNA 122 top2 RC or SELEKTA 171 top2 RC device (No additional power unit is required when connecting to a minimum of 2 devices)
- Operating voltage: 230 V AC
- Width: 2 modules
|
| PC set OBELISK top2- Switching programs created on the PC by means of the convenient OBELISK top2 software can be transferred via USB interface to the OBELISK top2 memory card and from the card to the time switch and vice versa. Thus no PC or laptop is required on-site. Programming and the program printout can be done comfortably from the desk
- For Windows XP/Vista/7/8 (32/64 Bit)
- Consisting of: Memory card, USB plug adapter, software
|
| Memory card OBELISK top2 |
| SendoPro 868-A- Infrared remote control for the convenient startup of HTS presence detectors
- The SendoPro 868A management remote control for the electrician enables efficient start-up and flexible adaptation to new applications
- Rapid adjustment of parameters to changed operating conditions without uninstalling detectors
|
| theSenda P- Service remote control
- ON/OFF
- Teach-In function for teaching in the current brightness value
|
| SPHINX RC 104 Pro- Service remote control for SPHINX 104
- ON/OFF
- Teach-in function for teaching in the current brightness value
|
| SPHINX RC 105 Pro- Service remote control for SPHINX 105
- ON/OFF
- Teach-in function for teaching in the current brightness value
|
