家居与楼宇控制 > KNX > 控制器 > RME 8 T KNX

RME 8 T KNX

描述

8-way switching or 4-way blind actuator MIX2
Extension module MIX2
For upgrading to maximum of 24 channels
Flexible channel function selection as switching actuator or for controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
Up to two extension modules MIX or MIX2 can be connected to one base module
Device and KNX bus module can be swapped independently of each other
Removable KNX bus module enables devices to be changed without reprogramming
Manual set-up and use of actuator is possible without KNX bus module
LED switching status display for each channel
Manual operation on device (even without bus connection)

安装类型	DIN rail
宽度	4 modules
连接类型	Terminal screws \| Bus connection: KNX bus terminal
最大电缆截面	Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² \| Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
通道数	8
触点类型	NO contact, 16 A, 3 A
开口宽度	< 3 mm
白炽灯负载	2000 W
荧光灯负载（常规）并联校正	1300 W (140 µF)
荧光灯负载（常规）未修正	2000 VA
荧光灯负载（电子镇流器）	1200 W
节能灯	300 W
LED 灯	< 2 W = 55 W or 2-8 W = 180 W or > 8 W = 200 W
电压输出	240 V AC
开关量输出	Potential-free
Switching of various phases	Possible
适用于SELV	Yes if all channels switch at SELV
工作环境温度	-5 °C … +45 °C
防护等级	IP 20
防护类型	II according to EN 60 669