家居与楼宇控制 > KNX > 时钟 > TR 648 top2 RC-DCF KNX

TR 648 top2 RC-DCF KNX

描述

  • 数字时间开关与年度和天文时间程序
  • 通过外部天线DCF连接时间同步
  • 无需市电电源供电
  • 8 通道
  • 每2根导线一个DuoFix弹簧接线端子
  • 显示用户指南
  • 800 存储单元
  • OBELISK top2 存储卡接口(PC 编程)
  • 8 年电力储备 (锂电池)
  • ON-OFF 时间开关
  • 脉冲程序
  • 循环程序
  • 丰富的全年时钟功能
  • 天文开关功能(全年的日出和日落时间自动计算)
  • 开关预选
  • 永磁开关 ON/OFF
  • 倒计时器
  • 集成小时计数器
  • 假日程序
  • 2个随机程序
  • 显示器背光(可关闭)
  • PIN 编码
  • 自动夏/冬时制转换
  • 其它总线设备的时间和日期同步

技术参数

KNX工作电压 总线电压, ≤12 mA
宽度 3 modules
安装类型 DIN rail
通道数 8
存储单元数 800
在25℃的时间精度 ≤ ± 0,5 s/day (quartz) or DCF77
最短的开关时间 1 s
显示 LCD
工作环境温度 -5 °C … +45 °C
防护等级 IP 20
防护类型 III according to EN 60 730-1

接线图

TR 648 top2 RC-DCF KNX

尺寸图

TR 648 top2 RC-DCF KNX

配件

商品编号 数据表 文件筐
Antenna top2 RC-DCF - Radio control via antenna with top2 RC devices: To ensure good reception, do not install the antenna
                                 in cellars or on distribution boxes. Connection is made via separate 2-wire, unscreened high-voltage power cable (max. 100
                                 m), up to 10 Theben top2 RC devices can be connected. Polarity, short-circuit and interruption of the antenna circuit are
                                 each visually displayed to help with installation.

Antenna top2 RC-DCF

9070410
更多
PC set OBELISK top2 - Switching programs created on the PC by means of the convenient OBELISK top2 software can be transferred
                                 via USB interface to the OBELISK top2 memory card and from the card to the time switch and vice versa. Thus no PC or laptop
                                 is required on-site. Programming and the program printout can be done comfortably from the desk

PC set OBELISK top2

9070409
更多
Memory card OBELISK top2 - Individual memory card

Memory card OBELISK top2

9070404
更多

下载

格式 下载
CAD 符号 (DXF/DWG) ZIP
手册 PDF
操作说明 PDF
软件 ZIP
KNX 数据库 ZIP
TR 648 top2 RC-DCF KNX - Digital time switch with yearly and astronomical time program

TR 648 top2 RC-DCF KNX

商品编号 6489210
数据表
文件筐