|
|
|
|
| Simple settingNo interrupted coverage No long searches: The adjusters are highly visible, easily accessible and easy to set using a screwdriver on the bottom of the detector.
|
|
| Simple and rainprooftheLuxa has protection rating IP 55 and can be installed anywhere outdoors, no matter how weatherproof the installation location.
|
|
| Clever Teach-In-functionWith the clever teach-in function, the current lux value can be permanently saved as a threshold. Without any specialist knowledge. By the end user. It couldn't be easier.
|
|
| High switching capacityWith its zero-cross switching, theLuxa can handle switch loads of up to 10 amperes. This allows you to connect several lamps at the same time. For example when larger areas, such as loading ramps or hotel complexes, are to be illuminated. This gives you more security in your planning, lowers costs and reduces installation times, as you can save the additional modules that are otherwise needed. In the end, this is good for the environment, as the lifespan of the lamps is extended.
|
|
| Suitable for flush-mounted boxes If connections already exist, there is no need to drill new holes for theLuxa P. The detector can be fixed to a flush-mounted box (60 mm). Simply screw it on and it's ready.
|
|
| Manual switchingThe motion detector can also be switched on manually. This can be useful if you hear a sound outside and you want to switch on the outdoor lighting from inside.
|
|
| Practical pulse functionThe pulse function allows the motion detectors to be installed into existing electrical installations with staircase light timer switches or KNX binary inputs without expensive adjustments.
|
|
| Convenient creep-under protectiontheLuxa's creep under protection also covers the areas directly under and even a little behind the detector. This means that the light comes on when it is needed. Immediately, and not when you've already tripped over the first steps.
|
|
| Swivelling sensor headWith its horizontally and vertically swivelling sensor head, theLuxa only detects movement in those areas where it really should.
|
|
| Clever test functionWith the clever test function, the detection area can be established, set and optimised immediately after installation. And this even in daylight and sunshine.
|
|
| Simple area rescriptionThe detection area can be individually restricted with practical cover clips. This means that unwanted activation of the detector due to movement next door or on the pavement can be avoided.
|
|
| Easy to use remote constrolWith the theSenda P remote control, settings can be conveniently made and changed from the ground. This is faster, shortens installation times and lowers costs. And, moreover, it is safer.
|
|
| High light outputIf this is not illuminating: The 8 W of the LEDs corresponds to around 100 W of a traditional halogen lamp. The colour temperature of 6000 K is daylight white.
|
|
| Sustainably energy-efficientWith respect to energy-saving, LUXA LED spotlights are ahead of the pack: With a power consumption of only 0.3 W in standby or 0.5 W with LUXA 102-180 LED 32 W, the detectors work extremely efficiently.
|
|
| More spacious socketLUXA-LED has a socket with a large terminal area. This simplifies and speeds up the installation, as the detector itself is not in the way during installation and can be easily attached at the end.
|
|
| Flexible dimming functionThe dimming function allows to switch on the spotlight permanently, when reaching the set lux value. This is especially useful on escape routes or in outside facilities of hospitals, senior residences or other care facilities.
|
|
| Extendable via 2nd switching outputAdditional devices, such as further LED spotlights without detector, can be connected via the additional relay output of the 32 W spotlight with motion detector.
|
|
| Master/ Master switchingThe area to be lit can be increased with the master/master switching of two devices.
|
