Presence and motion detectors > Motion detectors/ Spotlights > Outdoor without spotlight > Not remote-controlled > LUXA 101-180 white

LUXA 101-180 white

Description

Motion detector (PIR)
Automatic lighting control based on presence and brightness
180掳 detection angle
For outdoor use
Additional creep under protection
Sensor head can be turned by 卤 90掳 horizontally and by 40掳 downwards
Mixed light measurement suitable for the control of fluorescent, incandescent and halogen lamps
Single-handed plug-in installation with retained screws
Instant start-up possible via factory preset
Adjustable brightness switching value and switch-off delay
Sensitivity can be reduced to limit detection area
Controls are place protected

Operating voltage	230 V AC
Frequency	50聽鈥撀�60 Hz
Stand-by consumption	~0,9 W
Light measurement	Mixed light measurement
Number of channels	1
Type of contact	NO contact
Installation type	Wall installation
Setting range brightness	5聽鈥撀�1000 lx
Switching capacity light	10 A (at 230 V AC, cos 蠁 = 1), 6 A (at 230 V AC, cos 蠁 = 0.6), 3 AX (at 230 V AC, cos 蠁 = 0.3)
Detection angle	180掳
Recommended installation height	2聽鈥撀�4 m
Switching output	Potential-free
Light switch-off delay聽	5 s-12 min
Incandescent lamp load	1000 W
Fluorescent lamp load (conventional) not corrected	900 VA
Fluorescent lamp load (conventional) parallel-corrected	200 VA 18 碌F
Fluorescent lamp load (conventional) series-corrected	900 VA
Fluorescent lamp load (conventional) lead-lag circuit	400 VA
Fluorescent lamp load (electronic ballast)	400 VA
Lamps	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Ambient temperature	-25 掳C聽鈥β�+45 掳C
Protection class	II
Type of protection	IP 54