Presence and motion detectors > Presence detectors > Ceiling installation > 230 V > thePrema S360 DALI UP WH

thePrema S360 DALI UP WH

Description

*Available from May 2016*
Passive infrared presence detector for ceiling mounting
Square 360掳 detection range for an accurate and simple planning
DALI interface in accordance with EN 62386 for max. 25 DALI electronic ballasts
Automatic allocation of DALI participants (DALI Broadcast)
Automatic lighting regulation with constant light control
Mixed light measurement suitable for switching fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs
Facility to connect a push button for manual dimming and switching (single-button control)
Fully or semi-automatic operation switch-selectable
Brightness switching level, self-learning switch-off delay time, stand-by time and stand-by brightness can be adjusted
Scene component with two built-in scenes
Ready for immediate use due to factory preset
Test mode for checking function and detection area
Extension of detection area via Master/Slave or Master/Master switching, a maximum of 10 detectors can be switched at the same time
Ceiling installation in flush-mounted socket
Ceiling installation possible with surface-mounted frame
User remote control theSenda S (option)
Service remote control SendoPro (option)

Operating voltage	230 V AC +10 % / -15 %
Frequency	50 Hz
Recommended installation height	2聽鈥撀�3 m
Minimum height	> 1,7 m
Installation type	Ceiling installation
Power consumption	~0,5 W
Light measurement	Mixed light measurement
Setting range brightness	5聽鈥撀�3000 lx
Stand-by time light	0 s聽鈥撀�60 min / on
Stand-by brightness	1聽鈥撀�25 %
Lamps	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Control output	50 mA
Type of connection	Screw terminals
Max. cable cross section	max. 2 x 2,5 mm虏
Size of concealed housing	脴 55 mm (NIS, PMI)
Ambient temperature	+0 掳C聽鈥β�+50 掳C
Type of protection	IP 40 (when fitted)