Presence and motion detectors > Presence detectors > Ceiling installation > 230 V > theRonda P360-100 WH GST

theRonda P360-100 WH GST

Description

Presence detector (PIR), with pre-configured cable and Wieland GSTi18 connector, cable length 1,50 meter
Passive infrared presence detector for ceiling mounting
Round detection area 360掳, up to 脴 24 m (452 m²)
Automatic presence- and brightness-dependent control for lighting
Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs
Channel A, light: relay, 230V
Choice of fully or semi-automatic operation
Adjustable brightness switching value, teach-in function
Reduction of switch-off delay time in the event of short presence (brief-presence)
Connection option for sensors or switches for manual switching with automatic recognition of sensor/switch
Pulse function for staircase light time switch
Sensitivity adjustable
Detection area can be limited using cover clip
Ready for immediate use due to factory preset
Test mode for checking function and detection area
Ceiling installation in flush-mounted socket
Ceiling installation also possible with surface-mounted frame
User remote control theSenda S, management remote control SendoPro (optional)

Operating voltage	110聽鈥撀�230 V AC
Frequency	50聽鈥撀�60 Hz
Recommended installation height	2聽鈥撀�3,5 m
Minimum height	> 1,7 m
Installation type	Ceiling installation
Power consumption	~0,15 W
Light measurement	Mixed light measurement
Setting range brightness	30聽鈥撀�3000 lx
Light switch-off delay聽	10 s - 60 min
Lamps	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Incandescent/halogen lamp load	2300 W
Compact and flourescent lamps	1150 VA (cos 蠁 = 0,5)
LED lamp	< 2 W = 60 W or > 2 W = 180 W
Type of connection	Screw terminals
Max. cable cross section	max. 2 x 2,5 mm虏
Size of concealed housing	脴 55 mm (NIS, PMI)
Ambient temperature	-15 掳C聽鈥β�+50 掳C
Type of protection	IP 54 (when fitted)