Presence and motion detectors > Presence detectors > Ceiling installation > 230 V > theRonda S360-100 WH GST

theRonda S360-100 WH GST

Description

*Available from June 2016*
Presence detector (PIR), with pre-configured cable and Wieland GSTi18 connector, cable length 1,50 meter
Passive infra-red presence detector for ceiling installation
Circular detection area 360掳, up to 脴 9 m (64 m2)
Automatic motion and brightness-dependent control for lighting
Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs
Channel A light: relay, 230 V
Operation as fully automatic device
Brightness switching value configurable, teach-in function
Pulse function for staircase light time switch
Time delay configurable
Detection sensitivity configurable
Test mode for checking function and detection area
Ready for immediate use due to factory presetting (Brightness switching value 300 lux, Time delay 10 min.)
One of these optional remote controls is required for changing the values and attitudes:
Management remote control SendoPro
Installation remote control theSenda P
Optional user remote control: theSenda S

Operating voltage	230 V AC
Frequency	50 Hz
Recommended installation height	2聽鈥撀�3,5 m
Minimum height	> 1,7 m
Installation type	Ceiling installation
Light measurement	Mixed light measurement
Setting range brightness	30聽鈥撀�3000 lx
Light switch-off delay聽	10 s - 60 min
Lamps	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Incandescent/halogen lamp load	2300 W
Type of connection	Screw terminals
Max. cable cross section	max. 2 x 2,5 mm虏
Size of concealed housing	脴 55 mm (NIS, PMI)
Ambient temperature	+0 掳C聽鈥β�+50 掳C
Type of protection	IP 54 (when fitted)