Time and light control > Staircase time switches > DIN rail > ELPA 6 plus

ELPA 6 plus

Description

Staircase time switch, electronical
Zero-cross switching for relay-saving switching and high lamp loads
Multi-functional device with 10 available functions, set at the front of the device
Without multi-voltage input
Switch-off pre-warning (two flashes) optimized for switching LEDs
Extended function activated via long button press
Immediate secondary switching (stair light switch) or prematurely switched off (pulse switch with switch-off delay)
Permanent switch
Electronic pulse light
Terminal layout same as ELPA 8
Extremely accurate
Push button input with electronic overload protection
Automatic 3 or 4 conductor detection (4 conductor with connection for floor lighting, 3 conductor no longer permitted for new systems)

Operating voltage	220聽鈥撀�240 V AC
Frequency	50聽鈥撀�60 Hz
Width	1 modules
Installation type	DIN rail
Stand-by consumption	~0,9 W
Glow lamp load	150 mA
Setting range time	0,5聽鈥撀�20 min
Type of connection	3-/4-conductors
3/4-way conductors	Automatic
Secondary switching	At once
Duty cycle in per cent	100
Type of contact	NO contact
Opening width	< 3 mm (碌)
Switching output	Not potential-free (230 V)
Incandescent/halogen lamp load	3600 W
Energy saving lamps	250 W
LED lamp	< 2 W = 55 W or 2-8 W = 150 W or > 8 W = 180 W
Fluorescent lamp load (electronic ballast)	1000 W
Switching capacity	16 AX (at 230 V AC, cos 蠁 = 0.3), 16 A (at 230 V AC, cos 蠁 = 1)
Switch for permanent light	Rotary switch
Test approval	VDE
Housing and insulation material	High-temperature resistant, self-extinguishing thermoplastic
Ambient temperature	-25 掳C聽鈥β�+50 掳C
Protection class	II
Type of protection	IP 20