Time and light control > Twilight switches > DIN rail > Analogue > LUNA 110 AL 24V

LUNA 110 AL 24V

Description

Analogue twilight switch
External light sensor included in delivery
Adjustable On and Off switching delay
to avoid faulty operation caused by lightning, car headlights etc.
Display of channel and switching status
DuoFix spring terminals
for 2 conductors per connection terminal
Extended brightness levels and adjustable delay
Five adjustable brightness levels for simple setting of lux value
Zero-cross switching for relay-saving switching and high lamp loads (not with 24 V devices)
Permanent OFF and permanent ON function can be set on the potentiometer
Test function
for monitoring installation independent of set brightness value
Infinitely adjustable switching brightness

Operating voltage	12聽鈥撀�24 V UC
Frequency	50聽鈥撀�60 Hz
Number of channels	1
Stand-by consumption	~0,2 W
Setting range brightness	2聽鈥撀�50000 lx
Switch-on delay	0聽鈥撀�20 min
Switch-off delay	0聽鈥撀�20 min
Type of contact	Changeover contact
Switching output	Potential-free
Width	2 modules
Installation type	DIN rail
Type of connection	DuoFix spring terminals
Keyboards	3 potentiometers
Switching capacity	16 A (at 250 V AC, cos 蠁 = 1), 2 AX (Fluorescent lamp load)
Switching capacity min.	<10 mA
Incandescent lamp load	1400 W
Halogen lamp load	1400 W
Fluorescent lamp load (conventional) parallel-corrected	58 W 7 碌F
Energy saving lamps	5 x 7 W, 4 x 11 W, 4 x 15 W, 4 x 20 W, 4 x 23 W
Fluorescent lamp load (electronic ballast)	180 W
Housing and insulation material	High-temperature resistant, self-extinguishing thermoplastic
Ambient temperature	-30 掳C聽鈥β�+55 掳C
Type of protection	IP 20, sensor IP 55
Protection class	II, Sensor III
Max. cable length to sensor	100 m

		Article number	Data sheet	Documents basket

	Analogue surface-mounted light sensor
		9070416
	more

	Analogue flush-mounted light sensor
		9070011
	more

	Wall mounting kit 35 mm
		9070064
	more

	Front panel kit
		9070001
	more