Time and light control > Twilight switches > DIN rail > Analogue > LUNA 120 top2 EL

LUNA 120 top2 EL

Description

Twilight switch with integrated weekly timer
External light sensor included in delivery
Analogue adjustable switching brightness
Adjustable On and Off switching delay
to avoid switching errors caused by lightning, car headlights etc. Preset 1 minute
Switching brightness and switching delay can be set separately for switching On and Off
Fixed ON and OFF times (e.g. nighttime interruption)
can be programmed independent of brightness
Onscreen display of channel and switching status
DuoFix spring terminals
for 2 conductors per connection terminal
Zero-cross switching for relay-saving switching and high lamp loads
Interface for OBELISK top2 memory card (PC programming)
2. insertable switching program
Copying programs
Storing programs
Holiday program with yearly function
Different summer/winter time rules can be selected or freely defined
Permanent switching ON/OFF
Test function
(Permanent ON) to check the installation independently of set brightness value
Switching preselection
Display back light (can be turned off)
PIN coding
Operating hours counter (with reminder function)

Operating voltage	220聽鈥撀�240 V AC
Frequency	50聽鈥撀�60 Hz
Number of channels	1
Number of memory locations	56
Stand-by consumption	~1,3 W
Capacity loss max.	1,7 W
Program	Weekly program
Additional program	Holiday program
Time basis	Quartz
Setting range brightness	2聽鈥撀�2000 lx
Switch-on delay	0聽鈥撀�59 min
Switch-off delay	0聽鈥撀�59 min
Type of contact	Changeover contact
Switching output	Potential-free, not for SELV
Width	3 modules
Installation type	DIN rail
Type of connection	DuoFix spring terminals
Keyboards	4 touch buttons, 1 potentiometer
Shortest switching times	1 min
Power reserve	10 years at 20 掳C
Switching capacity	16 A (at 250 V AC, cos 蠁 = 1), 10 A (at 250 V AC, cos 蠁 = 0.6), 10 AX (Fluorescent lamp load)
Switching capacity min.	<10 mA
Incandescent lamp load	2600 W
Halogen lamp load	2600 W
Fluorescent lamp load (conventional) not corrected	2300 VA
Fluorescent lamp load (conventional) series-corrected	2300 VA
Fluorescent lamp load (conventional) lead-lag circuit	2300 VA
Fluorescent lamp load (conventional) parallel-corrected	800 VA 80 碌F
LED lamp	< 2 W = 30 W or 2-8 W = 100 W or > 8 W = 120 W
Energy saving lamps	22 x 7 W, 18 x 11 W, 16 x 15 W, 16 x 20 W, 14 x 23 W
Fluorescent lamp load (electronic ballast)	650 W
Test approval	VDE
Housing and insulation material	High-temperature resistant, self-extinguishing thermoplastic
Ambient temperature	-30 掳C聽鈥β�+55 掳C
Type of protection	IP 20, sensor IP 65
Protection class	II, Sensor III
Max. cable length to sensor	100 m

		Article number	Data sheet	Documents basket

	Analogue surface-mounted light sensor
		9070416
	more

	Analogue flush-mounted light sensor
		9070011
	more

	Wall mounting kit 52,5 mm
		9070050
	more

	PC set OBELISK top2
		9070409
	more

	Memory card OBELISK top2
		9070404
	more

	Front panel kit
		9070001
	more