Time and light control > Twilight switches > Wall installation > LUNA 128 star

LUNA 128 star

Description

Twilight switch with integrated light sensor
Adjustable On and Off switching delay
to avoid faulty operation caused by lightning, car headlights etc.
Expanded brightness range
Test button
for monitoring installation independent of set brightness value. The button can be accessed without opening the device
Cable feed from the back and from below
Cover with snap-on function when opening for the straightforward installation of the device
Captive screws
Large terminal area
Brightness value can be set without opening the device
Large light exposure angle (approx. 180 degrees)
Infinitely adjustable switching brightness

Operating voltage	220聽鈥撀�230 V AC
Frequency	50聽鈥撀�60 Hz
Number of channels	1
Stand-by consumption	~0,6 W
Setting range brightness	2聽鈥撀�2000 lx
Preset brightness value	15 lx
Switch-on delay	2聽鈥撀�100 s
Switch-off delay	2聽鈥撀�100 s
Type of contact	NO contact
Switching output	Not potential-free (230 V)
Installation type	Wall installation or mast bracket
Type of connection	Screw terminals
Keyboards	1 test button
Switching capacity	16 A (at 230 V AC, cos 蠁 = 1), 10 AX (at 230 V AC, cos 蠁 = 0.3)
Incandescent lamp load	2300 W
Halogen lamp load	2300 W
Fluorescent lamp load (conventional) not corrected	2300 VA
Fluorescent lamp load (conventional) series-corrected	2300 VA
Fluorescent lamp load (conventional) lead-lag circuit	2300 VA
Fluorescent lamp load (conventional) parallel-corrected	400 VA 42 碌F
Energy saving lamps	90 W
Fluorescent lamp load (electronic ballast)	350 W
LED lamp	< 2 W = 20 W or 2-8 W = 55 W or > 8 W = 70 W
Test approval	VDE
Housing and insulation material	High-temperature resistant, self-extinguishing thermoplastic
Ambient temperature	-35 掳C聽鈥β�+55 掳C
Type of protection	IP 55
Protection class	II