Presence and motion detectors > Motion detectors/ Spotlights > Outdoor without spotlight > Remote controlled > theLuxa P220 WH

theLuxa P220 WH

Description

Motion detector (PIR)
Automatic lighting control based on presence and brightness
220掳 detection angle
For outdoor use
For installation on walls and ceilings
For larger, commercial outdoors properties such as offices, public buildings, hotels, schools, car parks and warehouses
Adjustable brightness switching value and switch-off delay
Sensitivity can be reduced to limit detection area
Area limit via lens attachment
Mixed light measurement suitable for the control of fluorescent, incandescent, halogen lamps and LEDs
Teach-in of current brightness value possible
Pulse function
Test function for checking detection area
Installation on flush-mounted socket possible (60 mm)
Single-handed plug-in installation
Instant start-up possible via factory preset
Controls are place protected
Terminal for protective earth conductor
Spacer included in delivery

Operating voltage	230 V AC
Frequency	50 Hz
Stand-by consumption	~0,3 W
Light measurement	Mixed light measurement
Number of channels	1
Installation type	Wall and ceiling installation
Setting range brightness	5聽鈥撀�1000 lx
Switching capacity light	10 A (at 230 V AC, cos 蠁 = 1), , 10 AX (at 230 V AC, cos 蠁 = 0.3)
Detection angle	220掳
Recommended installation height	2聽鈥撀�4 m
Light switch-off delay聽	1 s-20 min
Incandescent lamp load	2300 W
Fluorescent lamp load (conventional) parallel-corrected	1300 VA 140 碌F
Energy saving lamps	300 W
LED lamp	< 2 W = 60 W or > 2 W < 8 W = 180 W or > 8 W = 200 W
Lamps	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Ambient temperature	-25 掳C聽鈥β�+45 掳C
Protection class	II
Type of protection	IP 55